RESEARCH OF PHYSICAL AND MECHANICAL PROPERTIES OF HETEROCOMPOSITE POLYMER MATERIALS AND COATINGS FORMED FROM THEM HELIOTECHNOLOGICAL METHOD.
DOI:
https://doi.org/10.5281/zenodo.7337324Keywords:
composite polymeric materials (CPM), fillers, dispersion, microhardness, impact strength, operational properties, mechanical properties.Abstract
The results of studies of the influence of fillers from industrial kaolin of various grades on the performance properties of composite polymeric materials are presented. Processed when cured with direct exposure to natural solar radiation. The optimal amounts of fillers from a local natural mineral in the composition of a composite polymer material are determined. It is shown that in the future it is advisable to use concentrating solnachnoy radiation (CSR) with different parameters.
References
Ikromov N. et al. KRISTALLANISH VA QOTISHMALARNING QOTISH JARAYONIDA KOMPONENTLARNING O ‘ZARO TA’SIRI //Theoretical aspects in the formation of pedagogical sciences. – 2022. – Т. 1. – №. 6. – С. 39-46.
Ziyamukhamedova U.A., Bakirov L.Y., Rakhmatov E.A., Bektemirov B.Sh. Structure and properties of heterocomposite polymeric materials and coatings from them obtained by heliotechnological method / International Journal of Recent Technology and Engineering (IJRTE) ISSN: 2277-3878, Volume-8, Issue-3S, October 2019, pp. 399–402.
Ziyamukhamedova U.A., Bakirov, L.Y. Investigation of infiuence of fillers on the properties of composite polymers materials obtained with use of solar energy. /International Jurnal of Advanced Research in Science, Engineering and Technology. ISSN: 2350-0328 Vol. 5, Issue 3, March 2018.
Ziyamukhamedova U.A., Bakirov, L.Y. Investigation of infiuence of fillers on the properties of composite polymers materials obtained with use of solar energy. /International Jurnal of Advanced Research in Science, Engineering and Technology. ISSN: 2350-0328 Vol. 5, Issue 3, March 2018.
ZIYAMUKHAMEDOVA U. A. et al. INVESTIGATION OF INFLUENCE OF FILLERS ON THE PROPERTIES OF COMPOSITE POLYMERIC MATERIALS OBTAINED WITH THE USE OF SOLAR ENERGY //CHEMISTRY AND CHEMICAL ENGINEERING. – 2018. – Т. 2018. – №. 2. – С. 7.
U.A.Ziyamuxamedova, M.A.Nurdinov, L.Y.Bakirov MASHINASOZLIKDA QO‘LLANILADIGAN POLIFUNKSIONAL GETEROKOMPOZIT POLIMER MATERIALLAR UCHUN BOG‘LOVCHI TO‘LDIRUVCHILARNI TANLASH VA ASOSLASH // ORIENSS. 2021. №4. URL: https://cyberleninka.ru/article/n/mashinasozlikda-qo-llaniladigan-polifunksional-geterokompozit-polimer-materiallar-uchun-bog-lovchi-to-ldiruvchilarni-tanlash-va (дата обращения: 29.10.2022).
To'ychiyev X., Soliyev B. Prospects for the use of polymeric materials in machine parts //Asian Journal of Multidimensional Research. – 2022. – Т. 11. – №. 5. – С. 151-156.
Bakirov L., Toychiyev X., Toychiyev X. TERMOPLAST POLIMER XUSUSIYATLARIGA MAHALLIY TO ‘LDIRUVCHILARNING TURLARINI TA’SIRINI TADQIQ ETISH //Theoretical aspects in the formation of pedagogical sciences. – 2022. – Т. 1. – №. 5. – С. 310-314.
Muqimova D., Nurdinov M. COMPLIANCE WITH RESPONSIBILITY AND WORK REGIMES OF DRIVERS IN LEGAL REGULATORY DOCUMENTS DUE TO ACCIDENTS IN THE TRANSPORTATION OF INTERNATIONAL GOODS BY TRUCKS //Theoretical aspects in the formation of pedagogical sciences. –2022. –Т. 1. –No. 2. –С. 15-25
Икромов Н. А., Жалолова З. Х. Исследования адгезионная прочность полимерных покрытий обработанных в магнитном поле //SO‘NGI ILMIY TADQIQOTLAR NAZARIYASI. – 2022. – Т. 1. – №. 4. – С. 58-62.
Рузиматов М. А. У., Маҳмудов Ш. Ф. У. УЛУЧШЕНИЕ ЭКОЛОГИИ И ОХРАНЫ ОКРУЖАЮЩЕЙ СРЕДЫ (НА ПРИМЕРЕ РЕСПУБЛИКИ УЗБЕКИСТАН) //Universum: технические науки. – 2021. – №. 5-1 (86). – С. 20-22.
Bakirov L., To‘ychiyev H. SELECTION AND FOUNDATION OF POLYMER BINDER-FILLER SUBSTANCES FOR HETEROCOMPOSITE POLYMER MATERIALS USED IN MACHINE-BUILDING //Science and innovation in the education system. – 2022. – Т. 1. – №. 5. – С. 34-39.
Ziyamukhamedova U. A. et al. Improvement of methods and means of testing non-conventional tribosystems //AIP Conference Proceedings. – AIP Publishing LLC, 2022. – Т. 2432. – №. 1. – С. 030031.
Bakirov L. et al. GUARANTEE SAFE MOVEMENT BY DESIGNING DRIVER'S WORK MODE THROUGH VEHICLE KEY IN ORGANIZING INTERNATIONAL TRANSPORTATION //International Bulletin of Applied Science and Technology. – 2022. – Т. 2. – №. 10. – С. 154-158.
Dostonbek Z., Bunyodbek M. Examination of Vehicles Carrying Fast-Breaking Cargo //Eurasian Research Bulletin. – 2022. – Т. 14. – С. 25-29.
Mahammadjonov N., Mamasoliyev B., Muxtorov S. CALCULATION OF A ROAD MILLING TOOTH BY THE METHOD OF FINITE ELEMENTS //Current approaches and new research in modern sciences. – 2022. – Т. 1. – №. 5. – С. 7-13.
Mahammadjonov N. et al. YO ‘L FREZASI KONSTRUKSIYASINING TAHLILI //Science and innovation in the education system. – 2022. – Т. 1. – №. 5. – С. 45-49.
Ziyamukhamedova U.A., Bakirov, L.Y. Investigation of infiuence of fillers on the properties of composite polymers materials obtained with use of solar energy. /International Jurnal of Advanced Research in Science, Engineering and Technology. ISSN: 2350-0328 Vol. 5, Issue 3, March 2018.
Ziyamukhamedova U A, Bakirov LY, Rakhmatov E A and Bektemirov B Sh 2019 Structure and properties of heterocomposite polymeric materials and coatings from them obtained by heliotechnological method International Journal of Recent Technology and Engineering 8(3) 2277-8
Ziyamukhamedova, U. A., Almataev, T. O., Dzhumabaev, A. B., & Bakirov, L. Y. (2022, June). Improvement of methods and means of testing non-conventional tribosystems. In AIP Conference Proceedings (Vol. 2432, No. 1, p. 030031). AIP Publishing LLC.
S Turayev, X Tuychiyev, T Sardor, X Yuldashev The importance of modern composite materials in the development of the automotive industr -Asian Journal of Multidimensional Research (AJMR), 2021
A Nozimbek, T Khasanboy, T Elbek, U Sardor IMPROVEMENT OF PHYSICAL AND MECHANICAL PROPERTIES OF PLASTIC PARTS USED IN MACHINE BUILDING -Universum: технические науки, 2021
Бакиров Л., Шукуров М. РОЛЬ СПЕЦИАЛЬНЫХ КОМИССИЙ ПО БЕЗОПАСНОСТИ ДОРОЖНОГО ДВИЖЕНИЯ //International Bulletin of Applied Science and Technology. – 2022. – Т. 2. – №. 10. – С. 189-194.
