RESEARCH OF THE FUZZY CONTROL SYSTEM FOR ADJUSTING THREAD TENSION DURING THE WARPING PROCESS

Authors

  • Tukhtamurod Avezov Dotsent, Tashkent institute textile and light industry, Uzbekistan, 100100, Tashkent, Shahjakhon str №5

DOI:

https://doi.org/10.5281/zenodo.17994479

Keywords:

a warping machine, a frame of warp, a tension of thread, a fuzzy controller, a fuzzy control system, warping threads, a model.

Abstract

The paper considered issues of research into a fuzzy control system for the warping process. During the warping process, the reasons that cause defects in the final finished product have been studied, firstly which are thread breakage, thread tangling, the formation of loops on or under the belt, hanging loose threads and similar factors. To study the warping process its mathematical model is constructed. The forces and moments that arise due to oscillations, tensions and hanging threads and the influencing effects on the sag have been studied. In the initial mode, the time constant is reduced and additive disturbances are not taken into account; the transient process is not significantly improved by using a fuzzy controller. With an increase in the time constant or when taking into account external disturbances, the presence of a fuzzy controller made it possible to improve the quality of control.

References

Tukhtamurod Avezov, Zokhid Iskandarov, & Shokhrukh Madirimov. (2025). Synthesis of an Adaptive Fuzzy Control System for the Warping Process. Deutsche Internationale Zeitschrift Für Zeitgenössische Wissenschaft, 115, pp.42–48. https://doi.org/10.5281/zenodo.17546555. – dissertant tomonidan tandalash jarayonining noqatiy boshqarish tizimi uchun analitik usuldagi matematik modeli ishlab chiqilgan.

Avezov, Tukhtamurod Khayitmurodovich and Iskandarov, Zokhid Ergashboyevich (2025). “Increasing the Robustness of a Control System for a Complex Dynamic Plant by Correcting Nonlinearity in the Warping Process,” Chemical Technology, Control and Management: Vol. 2025: Iss. 4, Article 8, pp. 61-70. DOI: https://doi.org/10.59048/2181-1105.1700. – hammualliflikdagi nashrda bо‘linmas birlik о‘rinlidir.

Iskandarov, Z. E., & Avezov, T. H. (2025). Research and construction of a robust fuzzy control system for the warping process. Automation of Control Processes, 2/80, pp.30-39. https://doi.org/10.35752/1991-2927_2025_2_80_30. – hammualliflikdagi nashrda bо‘linmas birlik о‘rinlidir.

Avezov To‘xtamurod Hayitmurodovich (2025). Adaptiv noqat’iy xulosalash yordamida tizimining nochiziqliligini korreksiyalash. Development of science Ilmiy jurnal, 2025/9 Volume 2 ISSN 3030 -3907, 232-240 b.

Avezov, To’xtamurod Hayitmurodovich and Iskandarov, Zokhid Ergashboyevich (2024). “Research of the Fuzzy Control System for Adjusting Thread Tension During the Warping Process,” Chemical Technology, Control and Management: Vol. 2024: Iss. 3, Article 8. pp.59-65 DOI: https://doi.org/10.59048/2181-1105.1575. – hammualliflikdagi nashrda bо‘linmas birlik о‘rinlidir.

Fuzzy control system for yarn tension in the warping process Avezov, T., Iskandarov, Z., Khujanazarov, U. Aip Conference ProceedingsOpen source preview, 2025, 3377(1), 060006. https://doi.org/10.1063/5.0299636

Downloads

Published

2025-12-19

How to Cite

Avezov, T. (2025). RESEARCH OF THE FUZZY CONTROL SYSTEM FOR ADJUSTING THREAD TENSION DURING THE WARPING PROCESS. Academic Research in Modern Science, 4(70), 117-122. https://doi.org/10.5281/zenodo.17994479