ISSIQLIK ALMASHINUV QURILMALARINI SAMARADORLIGINI OSHIRISH: ADABIYOTLAR SHARHI
DOI:
https://doi.org/10.5281/zenodo.15754088Keywords:
Issiqlik almashinuvi, samaradorlik, chuqurcha dizayni, materiallar, chuqurcha geometriyasi, issiqlik almashinuvni kuchaytirish, issiqlik almashinuv qurilmalari.Abstract
Ushbu maqolada issiqlik almashinuv qurilmalarining samaradorligini oshirish bo‘yicha olib borilgan ilmiy tadqiqotlar va texnologik yondashuvlar tahlil qilinadi. Asosiy e’tibor chuqurchalar dizayni, material tanlovi, va innovatsion texnologiyalar yordamida issiqlik almashinuvi jarayonini optimallashtirishga qaratilgan. Chuqurchalar deb ataluvchi geometriyalar yordamida yuzadagi issiqlik almashinuvi samaradorligini oshirish usullari ko‘rib chiqiladi. Bu usul sirt bo‘ylab issiqlik o‘tkazuvchanlikni kuchaytirish orqali amalga oshiriladi. Ellipsoidal shakldagi chuqurchalar avvalroq girdob hosil qilishi sababli boshqa shakllarga nisbatan yuqori samaradorlikni ta’minlaydi.
References
M.A. Dafedar, Najeem M, Fakruddin Y, Chirag “Heat Transfer augmentation in different geometries of dimpled surface under natural convection an experimental approach” International Journal of Research in Engineering and Technology ISSN: 2319-1163.
Nopparat Katkhawa, Nat Vorayos, Tanongkiat Kiatsiriroat, YottanaKhunatorn, Damorn Bunturat, Atipoang Nuntaphan,“Heat transfer behaviour of flat plate having 45̊ ellipsoidal dimpled surfaces”, Case Studies in Thermal Engineering, 2(2014), pp. 67–74
Hemant C. Pisal, Avinash A. Ranaware, “Heat Transfer Enhancement by using dimpled Surface” IOSR Journal of Mechanical and Civil Engineering ISSN: 2278-1684
Pooja Patil, Prof. Padmakar Deshmukh, “An Experimental Study of HeatTransfer Enhancement in the Circular Channel with Almond Shape dimples” IOSR Journal of Mechanical and Civil Engineering , Volume 11, pp 48-57
Iftikarahamad H. Patel, Dr. Sachin L. Borse, “Experimental investigation of heat transfer enhancement over the dimpled surface” International Journal of Engineering Science and Technology.
Koonlaya Kanokjaruvijit, Ricardo F. Martinez-botas, “Jet impingement on a dimpled surface with different crossflow schemes”.
A. M. Kuethe (1971), Boundary Layer Control of Flow Separation and Heat Exchange, US. Patent No. 3,578,264.
Somin Shin, Ki Seon Lee, Seoung Duck Park and Jae Su Kwak “Measurement of the heat transfer coefficient in the dimpled channel effects of dimple arrangement and channel height” Journal of Mechanical Science and Technology 23 (2009), pp 624-630.
S.M. Gaikwad, R.B. Gurav, J.D Patil, A.A. Ramgude. “Computational investigation of convective heat transfer over a dimpled surface”.
Dhananjay R.Giram, A.M.Patil, “Exper-imental and Theoretical Analysis Of Heat Transfer Augmentation From dimpled Surface” International Journal of Engineering Research and Applications, Volume 3, Issue 5.
Yu Rao, Heat transfer of turbulent flow over Surfaces with spherical dimples and teardrop dimples, Int.Journal of Experimental Thermal and Fluid Science 61 (2015),201–209.
Hyun Sik Yoon, Numerical study on of flow and heat transfer in a cooling passage with a Tear-drop dimple surface.,Int.Journal, Thermal Sciences 89 (2015),121-135.
Yonghui Xie, Numerical investigation of flow and heat transfer in rectangular channel with teardrop dimple/protrusion, International Journal of Heat and Mass Transfer 84 (2015, 486–496.
Chaoyi Wan et.al carried out the experimental study of pressure loss and heat transfer in the pin fin-dimple channels with various dimple depths,Int.Journal of Applied Thermal Engineering 60 (2014),122-134.
C. Bi,Heat transfer enhancement in mini-channel heat sinks with dimples and cylindrical grooves. Int.Journal of Applied Thermal Engineering 80 (2014), 162-134.
Farhad Sangtarash, experimental and numerical investigation of the heat transfer augmentation and pressure drop in simple, dimpled and perforated dimpled louver fin banks with an in-line or staggered arrangement, International Journal of Heat and Mass Transfer 84 (2015),312-346.
Yan Feng ,experimental and numerical study of heat transfer and flow friction in channels with dimples of different shapes, International Journal of Heat and Mass Transfer 84 (2015),85-98.
Rachid Saim, Hamidou Benzenine and Said Abboudi, Omar Imine “ Numerical analysis of a turbulent flow in a channel provided with transversal waved baffles”.(2007),410-426.
Rajendra Karwa and B.K. Maheshwari “Heat transfer and friction in an asymmetrically heated rectangular duct with half and fully perforated baffles at different pitches” International Communications in Heat and Mass Transfer 36 (2009), 264–268.
Kang- Hoon Ko and N.K. Anand “Use of porous baffles to enhance heat transfer in a rectangular channel” International Journal of Heat and Mass Transfers 46 (2003), 4191– 4199.
