Перейти к главному меню навигации Перейти к основному контенту Перейти к нижнему колонтитулу сайта

Том 4 № 1 (2025)
Theoretical aspects in the formation of pedagogical sciences

Статьи

ASSEMBLY PROCESS OF UNIQUE BUILDINGS USING LARGE - SPAN SPACE SHELL STRUCTURES

Опубликован 2025-01-14

  • Razzoqov Nurmuhammadhon Sayidmahsud o’g’li
    • ,
  • Maqsudov Mirfayz Ismatilloyevich
    • ,
  • Elboyev Botir Nuriddin ugli

Razzoqov Nurmuhammadhon Sayidmahsud o’g’li
Senior Teacher Ph.D Samarkand State University of Architecture and Construction named after Mirzo Ulugbek,Uzbekistan (Samcasu).

Maqsudov Mirfayz Ismatilloyevich
Master's degree Samarkand State University of Architecture and Construction named after Mirzo Ulugbek,Uzbekistan (Samcasu).

Elboyev Botir Nuriddin ugli
Master's degree Samarkand State University of Architecture and Construction named after Mirzo Ulugbek,Uzbekistan (Samcasu).

Аннотация

The article explains the development of improved methods for calculating the stress­strain state of unique buildings with long spans, using shell structures during the assembly and disassembly stages, as well as the development of recommendations for the use of effective construction methods and computational design of large-span buildings.

Ключевые слова

spatial shell constructions, span unique buildings, physical modeling, assembly and disassembly, large span, geometric surface, shell.

PDF

Библиографические ссылки

  1. Adan, O. C. (2018). Energy Simulation in Building Design. Routledge.
  2. Al Awadi, A. S. (2016). Building Envelopes: An Integrated Approach.
  3. Routledge.
  4. American Concrete Institute (ACI). (2021). Building Code Requirements
  5. for Structural Concrete and Commentary. ACI 318.
  6. ASHRAE Handbook. (2019). Fundamentals of Building Design.
  7. American Society of Heating, Refrigerating, and Air Conditioning Engineers.
  8. Dynamic parameters of prestressed hanging systems Razzokov, N.S.,
  9. Akhmadiyorov, U.S. Key Engineering MaterialsЭта ссылка отключена., 2021, 887 KEM, страницы 698–705
  10. Energy and Environmental Analysis (EAE). (2019). Commercial Building
  11. Energy Modeling Guidelines. U.S. Department of Energy.
  12. Kenisarin, Murat, and Khamid Mahkamov. "Passive thermal control in
  13. residential buildings using phase change materials."Renewable and sustainable energy reviews 55 (2016): 371 - 398.
  14. Olesen, B. W. (2017). Building Thermal Analysis. CRC Press.
  15. Pirmatov R.Kh., Schipacheva. E.V., Rashidov J.G. "On peculiarities of
  16. formation of the thermal mode in operating panel buildings." International Journal of Scientific and Technology Research 8.10 (2019): 2533 -
  17. 2535.https://scholar.google.com/scholar?cluster=13779299636592450471&hl=ru&as _sdt=0,5&sciodt=0,5
  18. Poirazis, H. (2015). Advanced Building Envelope Materials. CRC Press.
  19. Sayfiddinov S. "Transfer of heat through protective operated wall structures and their thermophysical calculation for energy efficiency". European Science Review 1.11-12 (2018): 79 - 80.
  20. Sayfiddinov S. Development of subsidence deformations of humidified loess under seismic influences. Monograph. Tashkent, 2019 - 162 p.
  21. Sayfiddinov S., Akhmadiyorov U. "Ways of enhancing energy efficiency within renovation of apartment houses in the republic of Uzbekistan." International Journal of Scientific and Technology Research 9.2 (2020): 2292 - 2294.
  22. Sayfiddinov S., Akhmadiyorov U., Akhmedov P. "Optimization of modeling while increasing energy efficiency of building structures of public buildings." Theoretical & Applied Science 6 (2020): 16 - 19.
  23. Sayfiddinov S., Akhmadiyorov U.S., Razzokov N.S., Akhmedov P. Ensuring Energy Efficiency of Air Permeability of Interfloor Ceilings in The Sections of Nodal Connections the American Journal of Applied Sciences pp. 122 – 127, (2020).
  24. Sayfiddinov S., Miralimov M.M., Makhmudov S.M., Akhmadiyorov U.S. Modern Methods of Increasing Energy Efficiency of Buildings In The Republic Of Uzbekistan at the Design Stage, International Journal of Scientific and Technology Research 8, (11), pp. 1333 – 1336, November 2019.
  25. Sayfiddinov S., Yakupov O. “Proceedings of materials of the international scientific and technical conference on the theme of - sustainable architecture and city planning in the Aral Sea region” Nukus, April 22 - 23, 2021"Design features of the architecture of energy - efficient public buildings" 439 - 441 p.
  26. Smith, J. (2018). Thermal Performance of Building Envelopes. Wiley.
  27. Straube, J. (2017). Building Science for Building Enclosures. Building Science Corporation.
  28. The effect of a complex additive on the structure formation of cement stone in conditions of dry hot climate and saline soils Narov, R., Akhmadiyorov, U. E3S Web of Conferences, 2021, 264, 02064
  29. Egamova, M., & Matyokubov, B. (2023). Improving the energy efficiency of the external walls of residential buildings being built on the basis of a new model project. Евразийский журнал академических исследований, 3(3), 150-155.
  30. Salomovich, T. E., Samariddinovich, S. U., & Pulatovich, M. B. (2023). Improving the Heat Preservation Properties of the Exterior Walls of Brick Buildings. International Journal of Culture and Modernity, 28, 15-20.
  31. Матёкубов, Б. П., & Саидмуродова, С. М. (2022, August). КАМ СУВ ТАЛАБЧАН БОҒЛОВЧИ АСОСИДАГИ ВЕРМИКУЛИТЛИ ЕНГИЛ БЕТОНЛАР ТЕХНОЛОГИЯСИНИ ҚЎЛЛАНИЛИШИ. In INTERNATIONAL CONFERENCES (Vol. 1, No. 15, pp. 103-109).
  32. Turakulovna, E. M. U., & Pulatovich, M. B. (2024). Characteristics of Materials that Increase the Heat Resistance of Walls. Innovative: International Multidisciplinary Journal of Applied Technology (2995-486X), 2(2), 36-39.
  33. Matyokubov, B. P., & Rustamova, D. B. Perspective constructive solutions of modern composite external walls of sandwich type. International Journal For Innovative Engineering and Management Research.